Category Archives: Product Reviews

The Factors That Reduce Accuracy in Conveyor Belt Scales

Conveyor Belt system for Package tranfer machineAccuracy is the main requirement for conveyor belt scales. Acme Scale Technologies, a manufacturer of weighing equipment and precision products, agrees that accuracy needs to be repeatable. Problems with accuracy happen every now and then, and there are recurring factors as to why that takes place.

Idlers are Too High or Too Low

Figuring out the proper position of the idler for the weighing device may come as a challenge. This is the biggest problem when it comes to scale accuracy. You need to make sure that the idler isn’t too high above the conveyor or too low underneath. Getting that alignment can be a very hard process. As little as half a millimeter can create a sizeable negative impact on your conveyor.

A tight conveyer belt might bridge over the scale if the weigh idler is positioned too low compared to the other idlers. On the other hand, a weigh idler placed too high will cause the opposite effect. An increase in the belt tension can occur.

Belt Speed is Too Fast

If the conveyer moves too quickly, materials begin to bounce off of the surface. The conveyor belt scale misses the weight if the measuring happens while the material is in the air. Inaccuracy ranges from one to five percent when the belt speeds are greater than six meters per second. This is an issue particularly when high accuracy is required.

Consider consistent material profiling when the bouncing occurs repeatedly. This can help mitigate the rebound’s impact. For an accurate recording of the material, have it placed on the scale for a long period.

Rare Conduct of Calibration

Conveyer belt scales need to conduct the so-called “zero calibration” to determine the weights and forces of everything other than the items that will be weighed. The initial calibration records belt-related weight. When done, the weight will not discount the actual measurements.

The initial calibration may run smoothly but dynamics can change in a jiffy. This means you need to frequently perform calibration to ensure accuracy, repeatability, and linearity.

Accurate readings occurring repeatedly assure you that your conveyor belt scale is doing its job for you. Regularly monitor your scale. In most cases, frequent calibration always helps.

The Different Materials Labels Are Made Out Of

Document labeled urgentLabels serve myriads of purposes with their fundamental role being making the identification process of goods easier. Among other uses, labels also offer instructions and give out warnings.

Labels in NZ come in various sizes and comprise of different materials. Some factors often dictate the difference in choice of materials with the common ones being the budget and the surface upon one will place it.

For example, labels that would be in contact with a lot of moisture need to comprise of waterproof material. That said, below are the common types of label materials.

Industrial Vinyl

This material works well for labels that you will put outdoors. Industrial vinyl is not only chemical- and weather-resistant, but it is also has a fade resistance of approximately nine years. This material can also stretch, allowing labels made out of it to be easy to place on sharp curved surfaces and rivets.

White Polypropylene

Sometimes referred to as clear polypropylene, this material often plays the role of a substitute to vinyl. It is also solvent resistant and is flexible. Like the name suggests, this material is often available in white or clear with a matte or gloss finish. It is pocket-friendly when compared with polyester labels.

Destructible Vinyl

With labels made out of destructible vinyl, you cannot remove the label in one piece. This makes this material suitable for making labels that will be on proprietary products. You will often find labels made out of this material having words such as ‘Danger’ or ‘Security.’

If you are looking to have a brightly coloured label, you could go for those made out of foil and fluorescent paper. This material is available in colours such as pink, orange, green and red. Labels in such colours are best used to alert people.

With the many choices of label materials available, it is best that you consult a professional in the labelling industry to make the right choice to enjoy the benefits of labelling.

Important Things You Should Know About Automotive Testing

A woman testing a carMost of us know that cars are tested for safety, performance, comfort, and fuel economy because it is mandated by the government and other relevant organizations. Automotive testing covers a lot more than just these aspects, though.

You might be wondering what happens in automotive testing labs. JTL America shares some information to help you understand the process.

Tasks Carried Out in a Lab

Whether it is a headlight or a muffler, the chassis, or the mags, manufacturers have their products tested before installation. Automotive testing answers the following questions:

  • Can a car’s chassis withstand salt erosion?
  • Will a car’s engine perform well at high altitudes?
  • How well does the airbag work?
  • How safe is the glass used to make windshields and windows?
  • Does the car’s electrical system work seamlessly?
  • How durable are a vehicle’s shocks and struts?

The job of a testing lab is to offer quality assurance by doing in-depth testing and inspection before certifying a car for sale.

Areas of Testing

While many technologies have been around for years, stringent regulations are changing the way vehicles are built. Car manufacturers are expected to conduct thorough tests in the following areas, as consumers’ safety is at stake:

  • Automotive fluids – Engine lubricants play a key role in the engine’s function. Engine oils and fuels, lubricants, and dust separation are some of the key areas for testing.
  • Electrical and electronic components – Noise measurement, battery testing, headlamp testing, altitude simulation, and other tests ensure that components comply with SAE and OEM regulations in the country of manufacture, as well as industry and global standards.
  • Materials – Plastic, metal, and other components used to build a vehicle undergo rigorous testing to ensure that a car will work properly in extreme environments with temperatures ranging from -45˚C to 177˚C. The VOC test is also done to rule out chemical exposure.
  • Engine tests – Testing labs do emissions, noise measurement, engine endurance, and gear tests, to name a few. This is done on all vehicles sold by manufacturers.

Automotive testing labs also perform environmental tests, conduct IATF audits and certifications, test complex systems such as hybrid engines. Every manufacturer has a research facility for testing and uses the services of well-known labs as well to confirm data.

Microbes and Water: The Enemies of Stored Diesel Fuel

Above ground fuel tank holding diesel fuelDiesel fuel can last up to a year in its tank without problems. This stability can be a benefit to farmers or to residents in remote areas who need accessible fuel in long-term storage. In fact, you can even extend the life of diesel fuel up to five years when you treat it with a fuel stabilizer.

Prevent Condensation

Get rid of water contaminants by using products that either emulsify or demulsify it. Of course, prevention is better than cure. Keep diesel fuel safe from water by keeping your diesel tanks full. Lack of air space inside the tank discourages condensation, which can lead to the formation of water.

Kill the Microbes

You can still save your diesel fuel tank contaminated with microbes by treating the fuel with a biocide. Prevent microbes from forming in the first place by applying the biocide whenever you place diesel fuel in a long-term storage. Diesel fuel stabilizer already acts like biocides, so you can simply use such products unless you want actual biocides.

Degradation Agents

In spite of the stability of diesel fuel, two elements — microbes and water — can still affect its quality. Both of them can cause degradation in diesel, leaving you with darkened fuel that has sludges, gums, and varnishes. Water is the more serious enemy though, as its presence can encourage the growth of microbes.

Signs of Contamination

When you fill your vehicle or tractor with the water-contaminated diesel, you will experience engine problems that indicate the presence of water. The engine may cut out suddenly, and black or white smoke may come out from your engine.

Now that you know how to keep your diesel fuel safe, you can better store the fuel and ensure its long-term storage. You will be glad five years from now that you did all you can to make your fuel last.

 

Appliances that Need Regular Replacements

Electrician checking a malfunctioning refrigerator with lady ownerPeople have come a long way since the Industrial Revolution. Humans can no longer imagine living their lives without electricity and appliances. However, nothing lasts forever. Even the sturdiest ones need replacement. Otherwise, they become a waste of energy and costly to repair.

When it comes to home maintenance, do not forget to replace these appliances too:

Air Conditioner

ACs have a very long lifespan of up to 20 years, although you may not have to change the entire unit. You can replace the defective parts instead. Air conditioners, however, need regular maintenance for it to function properly. If you fail to keep up with that, you may have to buy a new one soon.

Furnace

Winters can be frigid cold, so furnaces are your best friends. Like the ACs, they can last for two decades. But even if they are still working, you have to think of replacing them by the thirteenth year. Furnaces become less efficient as they age. In turn, your electric bill may increase over time.

If you are living in Indiana where winters can be harsh, you can benefit from a healthy furnace. Keep track of its life and buy furnace in Indiana when necessary, preferably from reputable vendors such as Legacy Heating & Air.

Refrigerators

Many factors affect the longevity of the fridge. One of these is the type. For example, standard refs outlast the compact ones by at least three years. Another consideration is the amount of care you give it. The lack of it can mean damaged coils and refrigerants, which means they take a long time to cool.

This can then potentially increase your electric bill. You also need to clean it regularly. Lastly, see to it there is no mold growth that can harm your health.

These are mere guidelines. If you want to know the appliance’s estimated lifespan, check its manual. Read it too to know how to take care of these items properly.

Pizza Ain’t God…But the Minerals and Nutrients are Good for You!

a chef hauling the pizza from the table to the ovenThe average human body has a minimum requirement for minerals and nutrients to remain healthy, and at times, you trouble yourself too much, while you can get all the help you seek from a single meal. What? Yes, one dish—actually, from a slice of pizza that you can easily get from your next-door pizza restaurant in Janesville, MN.

Fight off the cold with a pizza pie

No one likes the sniffling that comes with the cold season, but you can fight it off with a decent serving of vitamins C. Since pineapples have a high concentration of vitamin C, you can fight off the flu with pizza with pineapple toppings. Also, with spinach toppings as spinach is a good source of Zinc and Iron, and Vitamin C as well.

Pizza for your gym

You do not have to stick to using protein shakes and supplements for your gym or yoga classes, while you can enjoy pizza with a variety of protein options from your local pizzeria. Pulled pork, ground beef, shrimp and pepperoni pizzas will make for a tasty meal and one package that will not leave you feeling empty even after leaving the gym.

Pizza for vegans

There are various vegan options for pizza eaters today. Ask your local pizza restaurant in Janesville, MN like Pizzeriavecchia.com to load up those artichoke hearts, grated/diced carrots, onion rings, zucchini, pepper, and avocado in your next order, so you enjoy your vegan pizza.

Don’t forget to garnish with freshly ground garlic and to kick up the flavors with a generous sprinkle of fresh, spicy Thai sauce, and you will never buy into “vegan is boring.”

By the way, is it okay for vegetarians to eat shrimp? Well, that is a subject for another day.

For sure, pizza is not God, but whether you need some extra vitamins, a daily serving of vegetables, a set of carbs, a pinch of salt and a variety of protein, then you will certainly love the perks that pizza can offer you. This guide is enough to help you enjoy your next pizza-eating experience, knowing the much you can get from each pie, not to mention the nutrients in the cheese – protein, Vitamins A and B12, and Calcium, Phosphorus and Zinc.

Is It Time to Replace Your HVAC? Top Ways to Tell

New HVAC UnitsSummer is still a few months away, but you can already start preparing your HVAC system for its cooling tasks as early as today. You can have it cleaned and maintained by air conditioning experts. You can also call for repairs if there is a problem with the system. If your HVAC system has been around for a long time, you will want to check if it needs replacement.

Here are the signs you need to watch out for:

Frequent Problems

You should get a replacement for your HVAC system if you frequently experience problems with it. These problems will be too costly to repair if they get worse. You can avoid spending a lot on repairs by investing in a new HVAC system in Jacksonville, Florida. An experienced air conditioning service provider can determine if it’s time to have your system replaced.

Increasing Energy Bill

HVAC problems can result in an increased energy bill. Of course, you can have the system repaired, but if the issue happens too often, you can get a replacement instead. It will be better to have a new system guaranteed to work efficiently for a long time than to deal with frequent problems and repair costs.

Finding a Replacement for Your HVAC System

As you look for a new HVAC system, you need to consider different factors that will determine how much you’ll spend, including the size of your home. The larger your home, the bigger your HVAC system must be. If you have the right size of system, you can expect maximum efficiency and savings. Other factors include the type of system and the accessories you want or need.

Sometimes, simple repairs to your HVAC system won’t work anymore. You need to know when it’s best to replace it with a new and upgraded unit to improve comfort, reduce maintenance and keep energy costs low.

Quick-Release or Slow-Release Fertilizer: Which is Better?

Using plant fertlizerNot all types of fertilizers are the same. While they can help your grass grow, some types may do more damage than good. This makes it even more important to know their differences or the types of nitrogen sources contained in the product you use.

Quick-Release Fertilizers

With these, plants get immediate access to nutrients. When applied and dissolved in water, the water-soluble nitrogen becomes accessible to grass. As quick-release fertilizers make nutrients rapidly available, they promote fast greening and shoot growth.

Greenside Landscaping and other Salt Lake City lawn fertilization experts note that the downside is they harm the soil through nitrate leaching. This could also mean that more fertilizer is wasted by running off into waterways and streams. They can also burn the grass when over-applied and only last for about two to four weeks.

Slow-Release Fertilizers

The best thing about these fertilizers is that they help grass grow uniformly. They can also last longer about six to eight weeks or even longer, which means that you don’t need to apply them frequently. They may release nutrients slowly, but they allow the grass to absorb nutrients more efficiently.

The major drawback, of course, is the price. This is because they’re more costly than quick-release fertilizers. Lawn care experts, however, encourage the use slow-release fertilizers if you want healthy grass. There are two types to choose from:

  • Organic – This contains water-soluble nitrogen. In most cases, they take more time to release nutrients. It works well on moist soil, which should also be warm enough to encourage organism activity.
  • Coated or Slowly Soluble – This often comes in the form of pellets and rely on soil moisture when releasing nutrients. Some coated fertilizers may also last for up to one year, resulting in fewer applications.

Slow-release or natural organic fertilizers are mostly recommended by lawn care professionals. It’s also important to remember to fertilize moderately, as an over-fertilized turf invites lawn problems. You can also benefit from getting expert help when fertilizing your lawn.

Bamboo: A Greener Sleeping Experience

 Bamboo Bed SheetsAside from being a Panda’s natural food and habitat, bamboos are known for its strength and durability. People in some of the provinces in the Philippines live in bamboo houses they made by themselves. A bamboo house is known for its durability. With proper care, it can last for years.

In the recent years, the bamboo plant started to enter the fabric industry. Bamboo bed sheets are starting to be a big thing and more and more people are starting to cater it. Here are some of the reasons why. 

Here are reasons why every bed needs a bamboo bed sheet: 

  1. Economical and ecological

Bamboo plants are easy to grow as they do now require pesticides and complex planting procedures, making it an earth friendly choice. Also, bamboo sheets do not cost more than traditional cotton linens. This makes it a good and suitable choice for your homes.

  1. Bed sheet for all seasons

Bamboo fiber is thermo-regulating and breathable. This makes it the perfect bed sheet choice throughout the year because it can keep you warm and cozy during the winters and make you feel cooler during the summer.

  1. Durable

If a bamboo can exhibit its durability in being a home, it also exhibits its strength even in its thinnest and softest form. Bamboo sheets can withstand anything but are pleasant to touch and even softer than cotton itself.

  1. Hypoallergenic

Bamboo plants require little to no fertilization because of its natural anti-bacterial properties. When made into bed sheets, bamboo retains (although not fully) its antimicrobial and hypoallergenic properties. The fabric is also resistant to dust mites and germs. This makes it a great choice for people prone to allergies and chemical reactions.

The next time you change your bed sheets, try bamboo bed sheets and make your sleeping experience a green one as well.

U.S. Plans to Update Info on Nutritional Product Labels

Product Labels

Product LabelsThe U.S. government plans to adopt changes on how food and beverage products are labeled to cut waste and improve the awareness nutrition information.

Many Americans are particularly confused on certain dates listed on a food product or beverage label, leading them to think that an item has gone bad or become unfit for consumption, according to Sasha Stashwitck of the National Resource Defense Council.

As a result, the average family in the country not only throws away around $1,500 worth of food in a year due to misinformation, but also contribute to the problem of material waste, Stashwitck said.

On the other hand, the USDA Food Safety and Inspection Service also intends to update nutritional information rules for labels on meat and poultry products.

Product Labels

The FSIS intends to change the regulations for nutrition label to align them with the U.S. Food and Drug Administration’s own rules. Aside from providing clearer details, the proposed rules aim to enhance awareness of healthy eating habits among consumers.

Some of the changes that may be imposed include the update on defining single-serving containers, the list of nutrients either required or allowed to be declared and modify the look of the Nutrition Facts label.

The FSIS announced the proposal on Dec. 1, 2016, and it will seek feedback from the public for the following 60 days.

One for All

With the prevalence of varying product labels on food products, the Department of Agriculture plans to simplify things for buyers by asking the food manufacturers to use the “Best If Used By” label to keep everyone on the same page.

As opposed to the traditional expiration date on items, Stashwitck said that the new one serves as producers’ guide for consumers on the shelf life and food quality of a certain product.

Flexo Impressions notes that buyers should also do their part by making sure food and other items are stored properly for safe consumption.